Ideal for systems using a low flow circulation pump and heater(Gecko SSPA and MSPA spa packs).
The controller will run with E-10/Laing pumps.
This controller will run the following configurations:
1 x Circulation Pump
2 x Single speed spa jet boost pump
1 x Single speed spa blower
Davey Spa-Quip LED light (can run up to 4 Davey Spa-Quip LED lights, also can run a new 12volt LED light)
1 x Ozone generator
This sytem requires component cables to have AMP connections for the pumps, blowers, ozones etc. If your components do not have cables with AMP leads you will need to change them. These leads leads are included in this kit.
Control kit includes:
1 x SP800AUS-20 Controller
1 x SP800 Rectangular touchpad
1 x Davey Multi Colour LED light
2 x Low flow heater tube directors
2 x 1 Port 19mm x 50mm Manifold
2 x 1.5mm x 3m AMP Cord(suitable for single speed pump)
2 x 1.0mm x 3m AMP Cord(suitable for blower, ozone or laing)
Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone.
Details:
Manufacturer: Davey Spa Quip®
Model: Q800AUS-LOWFLOW
Sold individually
Spa Controller Fault Reset Procedure
SP800 User Manual and Troubleshooting Guide
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
Still not sure this is the correct part? Contact our part experts.
SKU | Q800AUS-LOWFLOW |
Model # | Q800AUS-LOWFLOW |
Brand | Davey® SpaQuip® |
Shipping Weight | 1.0000kg |
Ideal for systems using a low flow circulation pump and heater(Gecko SSPA and MSPA spa packs).
The controller will run with E-10/Laing pumps.
This controller will run the following configurations:
1 x Circulation Pump
2 x Single speed spa jet boost pump
1 x Single speed spa blower
Davey Spa-Quip LED light (can run up to 4 Davey Spa-Quip LED lights, also can run a new 12volt LED light)
1 x Ozone generator
This sytem requires component cables to have AMP connections for the pumps, blowers, ozones etc. If your components do not have cables with AMP leads you will need to change them. These leads leads are included in this kit.
Control kit includes:
1 x SP800AUS-20 Controller
1 x SP800 Rectangular touchpad
1 x Davey Multi Colour LED light
2 x Low flow heater tube directors
2 x 1 Port 19mm x 50mm Manifold
2 x 1.5mm x 3m AMP Cord(suitable for single speed pump)
2 x 1.0mm x 3m AMP Cord(suitable for blower, ozone or laing)
Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone.
Details:
Manufacturer: Davey Spa Quip®
Model: Q800AUS-LOWFLOW
Sold individually
Spa Controller Fault Reset Procedure
SP800 User Manual and Troubleshooting Guide
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
Still not sure this is the correct part? Contact our part experts.
SKU | Q800AUS-LOWFLOW |
Model # | Q800AUS-LOWFLOW |
Brand | Davey® SpaQuip® |
Shipping Weight | 1.0000kg |
Ideal for systems using a low flow circulation pump and heater(Gecko SSPA and MSPA spa packs).
The controller will run with E-10/Laing pumps.
This controller will run the following configurations:
1 x Circulation Pump
2 x Single speed spa jet boost pump
1 x Single speed spa blower
Davey Spa-Quip LED light (can run up to 4 Davey Spa-Quip LED lights, also can run a new 12volt LED light)
1 x Ozone generator
This sytem requires component cables to have AMP connections for the pumps, blowers, ozones etc. If your components do not have cables with AMP leads you will need to change them. These leads leads are included in this kit.
Control kit includes:
1 x SP800AUS-20 Controller
1 x SP800 Rectangular touchpad
1 x Davey Multi Colour LED light
2 x Low flow heater tube directors
2 x 1 Port 19mm x 50mm Manifold
2 x 1.5mm x 3m AMP Cord(suitable for single speed pump)
2 x 1.0mm x 3m AMP Cord(suitable for blower, ozone or laing)
Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone.
Details:
Manufacturer: Davey Spa Quip®
Model: Q800AUS-LOWFLOW
Sold individually
Spa Controller Fault Reset Procedure
SP800 User Manual and Troubleshooting Guide
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
Still not sure this is the correct part? Contact our part experts.
SKU | Q800AUS-LOWFLOW |
Model # | Q800AUS-LOWFLOW |
Brand | Davey® SpaQuip® |
Shipping Weight | 1.0000kg |
We are proud that Spa World customers have given us a Five Star Trustpilot rating.
For peace of mind
With a Spa Store Account
on AU orders over $199*
With 7-day online chat support