Increases pH and total alkalinity in spas
Active ingredient: 1000g/kg SODIUM BICARBONATE
GENERAL INSTRUCTIONS:
Direction For Use:
pH INSTRUCTIONS and Directions for Use:
1. Have the water tested for both Total Alkalinity and pH.
2. Always adjust Total Alkalinity before raising the pH.
3. Calculate the required amount of Alkalinity & pH Increaser
4. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
5. Run filter for at least 1 hour.
6. Allow 3-4 hours before testing the pH level again.
Important Note: If pH has been 6.8 or lower for some time and corrosion of metal fixtures is apparent, seek professional advice before adding Alkalinity; pH Increaser as metal staining may occur.
Details:
Model: LC-INC500
Size: 500g
Manufacturer: LoChlor
Sold individually
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers. We will not accept responsibility for the use of these products.
Have a chemical question?
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.
Still not sure this is the correct chemical? Contact us.
SKU | LC-INC500 |
Model # | LC-INC500 |
Brand | SpaCare™ |
Shipping Weight | 0.5000kg |
Shipping Width | 0.100m |
Shipping Height | 0.130m |
Shipping Length | 0.100m |
Shipping Cubic | 0.001300000m3 |
Unit Of Measure | ea |
Increases pH and total alkalinity in spas
Active ingredient: 1000g/kg SODIUM BICARBONATE
GENERAL INSTRUCTIONS:
Direction For Use:
pH INSTRUCTIONS and Directions for Use:
1. Have the water tested for both Total Alkalinity and pH.
2. Always adjust Total Alkalinity before raising the pH.
3. Calculate the required amount of Alkalinity & pH Increaser
4. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
5. Run filter for at least 1 hour.
6. Allow 3-4 hours before testing the pH level again.
Important Note: If pH has been 6.8 or lower for some time and corrosion of metal fixtures is apparent, seek professional advice before adding Alkalinity; pH Increaser as metal staining may occur.
Details:
Model: LC-INC500
Size: 500g
Manufacturer: LoChlor
Sold individually
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers. We will not accept responsibility for the use of these products.
Have a chemical question?
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.
Still not sure this is the correct chemical? Contact us.
SKU | LC-INC500 |
Model # | LC-INC500 |
Brand | SpaCare™ |
Shipping Weight | 0.5000kg |
Shipping Width | 0.100m |
Shipping Height | 0.130m |
Shipping Length | 0.100m |
Shipping Cubic | 0.001300000m3 |
Unit Of Measure | ea |
Increases pH and total alkalinity in spas
Active ingredient: 1000g/kg SODIUM BICARBONATE
GENERAL INSTRUCTIONS:
Direction For Use:
pH INSTRUCTIONS and Directions for Use:
1. Have the water tested for both Total Alkalinity and pH.
2. Always adjust Total Alkalinity before raising the pH.
3. Calculate the required amount of Alkalinity & pH Increaser
4. Dissolve in a bucket of water, then pour slowly into the water with the pump & filter operating.
5. Run filter for at least 1 hour.
6. Allow 3-4 hours before testing the pH level again.
Important Note: If pH has been 6.8 or lower for some time and corrosion of metal fixtures is apparent, seek professional advice before adding Alkalinity; pH Increaser as metal staining may occur.
Details:
Model: LC-INC500
Size: 500g
Manufacturer: LoChlor
Sold individually
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers. We will not accept responsibility for the use of these products.
Have a chemical question?
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.
Still not sure this is the correct chemical? Contact us.
SKU | LC-INC500 |
Model # | LC-INC500 |
Brand | SpaCare™ |
Shipping Weight | 0.5000kg |
Shipping Width | 0.100m |
Shipping Height | 0.130m |
Shipping Length | 0.100m |
Shipping Cubic | 0.001300000m3 |
Unit Of Measure | ea |
We are proud that Spa World customers have given us a Five Star Trustpilot rating.
For peace of mind
With a Spa Store Account
on AU orders over $199*
With 7-day online chat support