Water with pH levels higher than the ideal range can corrode equipment, cause scale formation and metal staining, irritate skin and eyes of bathers and reduce the effectiveness of chlorine over algae and bacteria.
GENERAL INSTRUCTIONS
pH should be maintained in the range of 7.2 – 7.6. Total Alkalinity should be maintained between 125ppm – 150ppm.
Ensure spa water is tested prior to adding pH and Alkalinity Reducer.
DO NOT add more than 25 grams of Alkalinity and pH Reducer per 1000 Litres of water at any one time.
TOTAL ALKALINITY INSTRUCTIONS and DOSAGE:
Add 24gm of pH and; Alkalinity Reducer per 1000 litres of water to lower Total Alkalinity by 10 parts per million (ppm)
DIRECTIONS FOR USE:
Calculate the required amount of pH and Alkalinity Reducer (see dosage above).
Dissolve in a bucket of water, then pour slowly into the water with the pump and filter operating.
Circulate water for 3 hours and then re-check with a test and repeat if necessary.
Model: LC-REDU500
Size: 500ml
Sold individually.
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers.
We will not accept responsibility for the use of these products.
Have a chemical question?
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.
Still not sure this is the correct chemical? Contact us.
SKU | LC-REDU500 |
Model # | LC-REDU500 |
Brand | SpaCare™ |
Shipping Weight | 1.0000kg |
Shipping Width | 0.110m |
Shipping Height | 0.235m |
Shipping Length | 0.110m |
Shipping Cubic | 0.002800000m3 |
Unit Of Measure | ea |
Water with pH levels higher than the ideal range can corrode equipment, cause scale formation and metal staining, irritate skin and eyes of bathers and reduce the effectiveness of chlorine over algae and bacteria.
GENERAL INSTRUCTIONS
pH should be maintained in the range of 7.2 – 7.6. Total Alkalinity should be maintained between 125ppm – 150ppm.
Ensure spa water is tested prior to adding pH and Alkalinity Reducer.
DO NOT add more than 25 grams of Alkalinity and pH Reducer per 1000 Litres of water at any one time.
TOTAL ALKALINITY INSTRUCTIONS and DOSAGE:
Add 24gm of pH and; Alkalinity Reducer per 1000 litres of water to lower Total Alkalinity by 10 parts per million (ppm)
DIRECTIONS FOR USE:
Calculate the required amount of pH and Alkalinity Reducer (see dosage above).
Dissolve in a bucket of water, then pour slowly into the water with the pump and filter operating.
Circulate water for 3 hours and then re-check with a test and repeat if necessary.
Model: LC-REDU500
Size: 500ml
Sold individually.
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers.
We will not accept responsibility for the use of these products.
Have a chemical question?
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.
Still not sure this is the correct chemical? Contact us.
SKU | LC-REDU500 |
Model # | LC-REDU500 |
Brand | SpaCare™ |
Shipping Weight | 1.0000kg |
Shipping Width | 0.110m |
Shipping Height | 0.235m |
Shipping Length | 0.110m |
Shipping Cubic | 0.002800000m3 |
Unit Of Measure | ea |
Water with pH levels higher than the ideal range can corrode equipment, cause scale formation and metal staining, irritate skin and eyes of bathers and reduce the effectiveness of chlorine over algae and bacteria.
GENERAL INSTRUCTIONS
pH should be maintained in the range of 7.2 – 7.6. Total Alkalinity should be maintained between 125ppm – 150ppm.
Ensure spa water is tested prior to adding pH and Alkalinity Reducer.
DO NOT add more than 25 grams of Alkalinity and pH Reducer per 1000 Litres of water at any one time.
TOTAL ALKALINITY INSTRUCTIONS and DOSAGE:
Add 24gm of pH and; Alkalinity Reducer per 1000 litres of water to lower Total Alkalinity by 10 parts per million (ppm)
DIRECTIONS FOR USE:
Calculate the required amount of pH and Alkalinity Reducer (see dosage above).
Dissolve in a bucket of water, then pour slowly into the water with the pump and filter operating.
Circulate water for 3 hours and then re-check with a test and repeat if necessary.
Model: LC-REDU500
Size: 500ml
Sold individually.
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers.
We will not accept responsibility for the use of these products.
Have a chemical question?
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.
Still not sure this is the correct chemical? Contact us.
SKU | LC-REDU500 |
Model # | LC-REDU500 |
Brand | SpaCare™ |
Shipping Weight | 1.0000kg |
Shipping Width | 0.110m |
Shipping Height | 0.235m |
Shipping Length | 0.110m |
Shipping Cubic | 0.002800000m3 |
Unit Of Measure | ea |
We are proud that Spa World customers have given us a Five Star Trustpilot rating.
For peace of mind
With a Spa Store Account
on AU orders over $199*
With 7-day online chat support