3-Tier Swim Spa Steps - Black Aluminium Spa Steps
Interest free with.
The AQ saltwater chlorine generator uses electrolysis in the presence of dissolved salt (NaCl) to produce Chlorine (hypochlorous acid (HClO)) and sodium hypochlorite (NaClO), which are the sanitising agents commonly used in most spas, swim spas, and swimming pools.
Pre-Order only, expect a lead time of approx 2-3 weeks depending on your location.
The AQ produces natural chlorine, which differs from that purchased in bottles that normally contain buffers and stabilisers, which affect water quality and can cause skin and eye irritation.
No need to buy bottled chlorine as the AQ creates natural chlorine automatically.
You will have peace of mind that the family is bathing in the cleanest possible spa water.
Soothing Salt Water
Saltwater has been used for 1000's of years because of its soothing quality and its natural effect in making skin feel softer and cleaner. Saltwater itself feels softer and gives a luxurious feel when you're soaking in it.
Saltwater spas are gentler on your body and your clothing than chlorinated spas. Most people complain of irritated eyes when using bottled chlorine, which is not the case with the AQ.
No need to keep bottled chlorine at home which is dangerous if consumed and is a fire hazard.
The Natural chlorine produced by AQ has no smell or taste.
Traditional saltwater systems require 4000 ppm of salt to create chlorine, at this level you can damage your spa, The AQ requires less than 2000 ppm of salt which is less salt than in your tears. You won't even realize you have salt in your spa!

I must admit, I was skeptical at first but the AQ has lived up to its promise of clean hassle free water! I can't thank you enough, my wife and I use the spa nearly everyday and I don't have to worry about anything! Thanks to David and his team for his quick response to any question or concern I had. Much appreciated...
- Andrew Henderson, Sydney, Australia

"We have had a Vortex Aqualsal swim spa for six years now . If we have had a problem the company couldn’t help us enough. On any issue they patiently worked through the resolution with us. I must admit since we changed the swim spa to a salt chlorinator system the water has been amazing. We use hardly any chemicals the pool is so clean and it has been a godsend on my skin"
- Debbie, NSW.

"Just a quick thank you and the team for the aquasal salt water system. Now had it over 12 months. Has saved me a lot of time and labour, looking after our pool spa. Recommended to anyone purchasing a spa. Please feel free to give them my name and number, for furture reference..."
- Greg, NSW

"We are very happy with the Aquasal system and support. It saves us the time and effort of testing and adding chemicals to our swim spa every day. Also, as I have psoriasis it has been a lot more beneficial and soothing on my skin than chlorine - highly recommended."
- John, NSW
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
Installation of the AQ Saltwater Chlorine Generator usually takes about 1-2 hours.
The AQ draws its power from the SpaNet controller (if present). As long as you have a spare power outlet available on your SpaNet controller, you will only need a spa technician. If you have both a heat pump and stereo installed drawing power from your controller, then you will need an electrician to install a protected electrical power outlet near your spa.
Once the unit is installed, you will need to add salt to your water in the range of 1,500 - 2,000ppm. It may take a few hours for the salt to dissolve and be detected by the AQ unit. The salt will dissolve more quickly in warmer water than in colder water. Allow for 1-2 days after installation of the unit and adding salt for the system to start sanitising your water.
No, the AQ system is recommended only for swim spas with a water capacity of over 5000L.
Yes, you will still need to balance and maintain your water periodically.
Yes, all other water-balancing products will work as usual.
The AQ system comes with a digital salt tester which you can use to test the salt levels and adjust as needed.
Yes you can use both chlorine based shock or chlorine free shock. This may be useful after a large number of guests have used your spa!
If you are changing from a standard Chlorine sanitiser, there is no need to empty your water. If you are changing from Hydrogen Peroxide or another type of sanitiser, then yes, you will need to empty your spa and start with fresh water.
You can purchase regular pool salt from Bunnings or most pool supply stores. Follow the instructions in the product manual for the initial setup.
For a swim spa of 5,000L, to reach an ideal salt level of 1,800 PPM, you should add approximately 9kg of salt.
For a swim spa of 10,000L, to reach an ideal salt level of 1,800 PPM, you should add approximately 18kg of salt
Add a smaller amount first and test - you can always add more if needed!
No. It is not recommended to use MagnaSpa minerals in the Aquasal system.
No, the Aquasal unit is only recommended for Vortex® swim spas.
The life of the cell is between 2 - 3 years. If you have a build-up of calcium then you can soak the cell in an acid solution such as vinegar. This will break up the calcium and clear the cell. You may need to look at reducing the pH in your spa if this continues to happen.
Model: AQSS
Manufacturer: AQ
Sold individually
Still not sure this is the correct part? Contact our part experts
| SKU | AQSS |
| Model # | AQCB |
| Barcode # | AQSS |
| Brand | AquaSal |
| Shipping Weight | 1.6000kg |
| Shipping Width | 0.350m |
| Shipping Height | 0.200m |
| Shipping Length | 0.300m |
| Shipping Cubic | 0.021000000m3 |
The AQ saltwater chlorine generator uses electrolysis in the presence of dissolved salt (NaCl) to produce Chlorine (hypochlorous acid (HClO)) and sodium hypochlorite (NaClO), which are the sanitising agents commonly used in most spas, swim spas, and swimming pools.
Pre-Order only, expect a lead time of approx 2-3 weeks depending on your location.
The AQ produces natural chlorine, which differs from that purchased in bottles that normally contain buffers and stabilisers, which affect water quality and can cause skin and eye irritation.
No need to buy bottled chlorine as the AQ creates natural chlorine automatically.
You will have peace of mind that the family is bathing in the cleanest possible spa water.
Soothing Salt Water
Saltwater has been used for 1000's of years because of its soothing quality and its natural effect in making skin feel softer and cleaner. Saltwater itself feels softer and gives a luxurious feel when you're soaking in it.
Saltwater spas are gentler on your body and your clothing than chlorinated spas. Most people complain of irritated eyes when using bottled chlorine, which is not the case with the AQ.
No need to keep bottled chlorine at home which is dangerous if consumed and is a fire hazard.
The Natural chlorine produced by AQ has no smell or taste.
Traditional saltwater systems require 4000 ppm of salt to create chlorine, at this level you can damage your spa, The AQ requires less than 2000 ppm of salt which is less salt than in your tears. You won't even realize you have salt in your spa!

I must admit, I was skeptical at first but the AQ has lived up to its promise of clean hassle free water! I can't thank you enough, my wife and I use the spa nearly everyday and I don't have to worry about anything! Thanks to David and his team for his quick response to any question or concern I had. Much appreciated...
- Andrew Henderson, Sydney, Australia

"We have had a Vortex Aqualsal swim spa for six years now . If we have had a problem the company couldn’t help us enough. On any issue they patiently worked through the resolution with us. I must admit since we changed the swim spa to a salt chlorinator system the water has been amazing. We use hardly any chemicals the pool is so clean and it has been a godsend on my skin"
- Debbie, NSW.

"Just a quick thank you and the team for the aquasal salt water system. Now had it over 12 months. Has saved me a lot of time and labour, looking after our pool spa. Recommended to anyone purchasing a spa. Please feel free to give them my name and number, for furture reference..."
- Greg, NSW

"We are very happy with the Aquasal system and support. It saves us the time and effort of testing and adding chemicals to our swim spa every day. Also, as I have psoriasis it has been a lot more beneficial and soothing on my skin than chlorine - highly recommended."
- John, NSW
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
Installation of the AQ Saltwater Chlorine Generator usually takes about 1-2 hours.
The AQ draws its power from the SpaNet controller (if present). As long as you have a spare power outlet available on your SpaNet controller, you will only need a spa technician. If you have both a heat pump and stereo installed drawing power from your controller, then you will need an electrician to install a protected electrical power outlet near your spa.
Once the unit is installed, you will need to add salt to your water in the range of 1,500 - 2,000ppm. It may take a few hours for the salt to dissolve and be detected by the AQ unit. The salt will dissolve more quickly in warmer water than in colder water. Allow for 1-2 days after installation of the unit and adding salt for the system to start sanitising your water.
No, the AQ system is recommended only for swim spas with a water capacity of over 5000L.
Yes, you will still need to balance and maintain your water periodically.
Yes, all other water-balancing products will work as usual.
The AQ system comes with a digital salt tester which you can use to test the salt levels and adjust as needed.
Yes you can use both chlorine based shock or chlorine free shock. This may be useful after a large number of guests have used your spa!
If you are changing from a standard Chlorine sanitiser, there is no need to empty your water. If you are changing from Hydrogen Peroxide or another type of sanitiser, then yes, you will need to empty your spa and start with fresh water.
You can purchase regular pool salt from Bunnings or most pool supply stores. Follow the instructions in the product manual for the initial setup.
For a swim spa of 5,000L, to reach an ideal salt level of 1,800 PPM, you should add approximately 9kg of salt.
For a swim spa of 10,000L, to reach an ideal salt level of 1,800 PPM, you should add approximately 18kg of salt
Add a smaller amount first and test - you can always add more if needed!
No. It is not recommended to use MagnaSpa minerals in the Aquasal system.
No, the Aquasal unit is only recommended for Vortex® swim spas.
The life of the cell is between 2 - 3 years. If you have a build-up of calcium then you can soak the cell in an acid solution such as vinegar. This will break up the calcium and clear the cell. You may need to look at reducing the pH in your spa if this continues to happen.
Model: AQSS
Manufacturer: AQ
Sold individually
Still not sure this is the correct part? Contact our part experts
| SKU | AQSS |
| Model # | AQCB |
| Barcode # | AQSS |
| Brand | AquaSal |
| Shipping Weight | 1.6000kg |
| Shipping Width | 0.350m |
| Shipping Height | 0.200m |
| Shipping Length | 0.300m |
| Shipping Cubic | 0.021000000m3 |
The AQ saltwater chlorine generator uses electrolysis in the presence of dissolved salt (NaCl) to produce Chlorine (hypochlorous acid (HClO)) and sodium hypochlorite (NaClO), which are the sanitising agents commonly used in most spas, swim spas, and swimming pools.
Pre-Order only, expect a lead time of approx 2-3 weeks depending on your location.
The AQ produces natural chlorine, which differs from that purchased in bottles that normally contain buffers and stabilisers, which affect water quality and can cause skin and eye irritation.
No need to buy bottled chlorine as the AQ creates natural chlorine automatically.
You will have peace of mind that the family is bathing in the cleanest possible spa water.
Soothing Salt Water
Saltwater has been used for 1000's of years because of its soothing quality and its natural effect in making skin feel softer and cleaner. Saltwater itself feels softer and gives a luxurious feel when you're soaking in it.
Saltwater spas are gentler on your body and your clothing than chlorinated spas. Most people complain of irritated eyes when using bottled chlorine, which is not the case with the AQ.
No need to keep bottled chlorine at home which is dangerous if consumed and is a fire hazard.
The Natural chlorine produced by AQ has no smell or taste.
Traditional saltwater systems require 4000 ppm of salt to create chlorine, at this level you can damage your spa, The AQ requires less than 2000 ppm of salt which is less salt than in your tears. You won't even realize you have salt in your spa!

I must admit, I was skeptical at first but the AQ has lived up to its promise of clean hassle free water! I can't thank you enough, my wife and I use the spa nearly everyday and I don't have to worry about anything! Thanks to David and his team for his quick response to any question or concern I had. Much appreciated...
- Andrew Henderson, Sydney, Australia

"We have had a Vortex Aqualsal swim spa for six years now . If we have had a problem the company couldn’t help us enough. On any issue they patiently worked through the resolution with us. I must admit since we changed the swim spa to a salt chlorinator system the water has been amazing. We use hardly any chemicals the pool is so clean and it has been a godsend on my skin"
- Debbie, NSW.

"Just a quick thank you and the team for the aquasal salt water system. Now had it over 12 months. Has saved me a lot of time and labour, looking after our pool spa. Recommended to anyone purchasing a spa. Please feel free to give them my name and number, for furture reference..."
- Greg, NSW

"We are very happy with the Aquasal system and support. It saves us the time and effort of testing and adding chemicals to our swim spa every day. Also, as I have psoriasis it has been a lot more beneficial and soothing on my skin than chlorine - highly recommended."
- John, NSW
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
Installation of the AQ Saltwater Chlorine Generator usually takes about 1-2 hours.
The AQ draws its power from the SpaNet controller (if present). As long as you have a spare power outlet available on your SpaNet controller, you will only need a spa technician. If you have both a heat pump and stereo installed drawing power from your controller, then you will need an electrician to install a protected electrical power outlet near your spa.
Once the unit is installed, you will need to add salt to your water in the range of 1,500 - 2,000ppm. It may take a few hours for the salt to dissolve and be detected by the AQ unit. The salt will dissolve more quickly in warmer water than in colder water. Allow for 1-2 days after installation of the unit and adding salt for the system to start sanitising your water.
No, the AQ system is recommended only for swim spas with a water capacity of over 5000L.
Yes, you will still need to balance and maintain your water periodically.
Yes, all other water-balancing products will work as usual.
The AQ system comes with a digital salt tester which you can use to test the salt levels and adjust as needed.
Yes you can use both chlorine based shock or chlorine free shock. This may be useful after a large number of guests have used your spa!
If you are changing from a standard Chlorine sanitiser, there is no need to empty your water. If you are changing from Hydrogen Peroxide or another type of sanitiser, then yes, you will need to empty your spa and start with fresh water.
You can purchase regular pool salt from Bunnings or most pool supply stores. Follow the instructions in the product manual for the initial setup.
For a swim spa of 5,000L, to reach an ideal salt level of 1,800 PPM, you should add approximately 9kg of salt.
For a swim spa of 10,000L, to reach an ideal salt level of 1,800 PPM, you should add approximately 18kg of salt
Add a smaller amount first and test - you can always add more if needed!
No. It is not recommended to use MagnaSpa minerals in the Aquasal system.
No, the Aquasal unit is only recommended for Vortex® swim spas.
The life of the cell is between 2 - 3 years. If you have a build-up of calcium then you can soak the cell in an acid solution such as vinegar. This will break up the calcium and clear the cell. You may need to look at reducing the pH in your spa if this continues to happen.
Model: AQSS
Manufacturer: AQ
Sold individually
Still not sure this is the correct part? Contact our part experts
| SKU | AQSS |
| Model # | AQCB |
| Barcode # | AQSS |
| Brand | AquaSal |
| Shipping Weight | 1.6000kg |
| Shipping Width | 0.350m |
| Shipping Height | 0.200m |
| Shipping Length | 0.300m |
| Shipping Cubic | 0.021000000m3 |
We are proud that Spa World customers have given us a Five Star Trustpilot rating.
For peace of mind
With a Spa Store Account
on AU orders over $199*
With 7-day online chat support