3-Tier Swim Spa Steps - Black Aluminium Spa Steps
Interest free with.
System is sold complete with Heater/Control Box, Oval Touchpad 2 X 50mm unions
This Controller can be set up in the following configurations:
High Voltage AMP Sockets:
(1) Pump 1A (one or two-speed pump) Pump 2 (single-speed pump, this socket can't be used if socket 1A has a two-speed pump fitted)
(2) AUX Output (this socket can run a blower or pump) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket.
(3) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket
Low Voltage Sockets inside controller:
(1) 2 X Touch pad sockets
(2) 4 X Davey LED light sockets, 1 X in-pool temp sensor socket, 1 X 12volt light Output
NOTE:
A) If a 2speed pump is fitted to Pump 1A socket you can't use 1B socket
B) Rectangular touch pads can be ordered on request Q70069-10SP8 for retrofitting SP1000.
C) Requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone.
Spa Controller Fault Reset Procedure
Details:
Model: Q800S-30KIT-OVAL
Manufacturer: Davey Spa Quip
Sold individually
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
SKU | Q800S-30KIT-OVAL |
Model # | Q800S-30KIT-OVAL |
Brand | Davey® SpaQuip® |
Shipping Weight | 1.0000kg |
System is sold complete with Heater/Control Box, Oval Touchpad 2 X 50mm unions
This Controller can be set up in the following configurations:
High Voltage AMP Sockets:
(1) Pump 1A (one or two-speed pump) Pump 2 (single-speed pump, this socket can't be used if socket 1A has a two-speed pump fitted)
(2) AUX Output (this socket can run a blower or pump) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket.
(3) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket
Low Voltage Sockets inside controller:
(1) 2 X Touch pad sockets
(2) 4 X Davey LED light sockets, 1 X in-pool temp sensor socket, 1 X 12volt light Output
NOTE:
A) If a 2speed pump is fitted to Pump 1A socket you can't use 1B socket
B) Rectangular touch pads can be ordered on request Q70069-10SP8 for retrofitting SP1000.
C) Requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone.
Spa Controller Fault Reset Procedure
Details:
Model: Q800S-30KIT-OVAL
Manufacturer: Davey Spa Quip
Sold individually
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
SKU | Q800S-30KIT-OVAL |
Model # | Q800S-30KIT-OVAL |
Brand | Davey® SpaQuip® |
Shipping Weight | 1.0000kg |
System is sold complete with Heater/Control Box, Oval Touchpad 2 X 50mm unions
This Controller can be set up in the following configurations:
High Voltage AMP Sockets:
(1) Pump 1A (one or two-speed pump) Pump 2 (single-speed pump, this socket can't be used if socket 1A has a two-speed pump fitted)
(2) AUX Output (this socket can run a blower or pump) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket.
(3) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket
Low Voltage Sockets inside controller:
(1) 2 X Touch pad sockets
(2) 4 X Davey LED light sockets, 1 X in-pool temp sensor socket, 1 X 12volt light Output
NOTE:
A) If a 2speed pump is fitted to Pump 1A socket you can't use 1B socket
B) Rectangular touch pads can be ordered on request Q70069-10SP8 for retrofitting SP1000.
C) Requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone.
Spa Controller Fault Reset Procedure
Details:
Model: Q800S-30KIT-OVAL
Manufacturer: Davey Spa Quip
Sold individually
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
SKU | Q800S-30KIT-OVAL |
Model # | Q800S-30KIT-OVAL |
Brand | Davey® SpaQuip® |
Shipping Weight | 1.0000kg |
We are proud that Spa World customers have given us a Five Star Trustpilot rating.
For peace of mind
With a Spa Store Account
on AU orders over $199*
With 7-day online chat support