Spa Store 500g Spa Conditioner and pipe cleaner
This Degreaser is used to clean the internal plumbing in your spa.
Used regularly, this product will keep your Spa or Spa Bath clean and fresh.
- Fast-acting, works in all water types
- Chlorine Free, Phosphate Free, Sulphate Free
- Suitable for both Spa Pools and Spa Baths
- Can be used in weekly maintenance
- Can also be used to flush plumbing just before emptying your spa or swim spa.
DIRECTIONS FOR SPA POOLS
- Switch on filter pump and add Spa Conditioner & Cleaner at a rate of 20mls (2 caps) per 1000 litres of spa water every two weeks. (1 cap = 10mls)
- Run the filter pump for one hour with blower and air controls open to aerate the spa. The cleaning process will result in the surface foam turning brown in colour. Scoop it out off the water surface to waste. (Use pantyhose over a coat hanger to act as a simple scoop)
- Once the spa water is clean, wipe the sides of the spa with a damp absorbent cloth.
- Use every two weeks as directed.
DIRECTIONS FOR SPA BATHS
- Fill spa bath with warm to hot water above jets.
- Open all the jets and air controls.
- Pour 50mls (5 caps) of Spa Conditioner & Cleaner into the water and run for 15 minutes. Foaming will occur which will turn brown depending on the amount of contaminants in the pipe work.
- Switch off the spa pump and drain the spa.
- Clean the interior of the spa bath using a damp cloth, immediately after draining.
- Treat the spa bath at least every three to four weeks.
Details
Contains: Alkyldimethylethylbenzylammonium Chloride
Manufacturer: Spa Store
Model: 5002004
Size: 500ml
Sold individually
Store in a cool place.
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only.Spa Store and its staff recommend you read the full instructions on all chemical containers. We will not accept responsibility for the use of these products.
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.
Spa Filter FAQ
Safety Data Sheet
Selection Tips
- Check your current water treatment type.
- Is your system chlorine based, non chlorine or Sanisol?
- Check your pool volume.
Still not sure this is the correct chemical?
Contact us