3-Tier Swim Spa Steps - Black Aluminium Spa Steps
Interest free with.
This is a great replacement controller for most portable spas.
Do not confuse this control box with the SV3-VH or SV4-VH or the XS series.
TOUCHPAD PROGRAMMABLE FILTRATION:
Smart touchpad menus easy-set time clock filtration cycle hours per day with flexible sleep settings to save you money.
GELL FILLED KEYPAD:
Unlike many keypads on the market, the SV2 spa touchpad
SMART VARIABLE HEATER: Larger heater for fast heat recovery and reduces heat loss while spa pool is in use; automatically alter its output to suit the available power when accessory loads are operating or reduce to lower Kw rating for circuits with minimum power.
HEAT PUMP INTERFACE: Spa heating/cooling control/heat pump functions controlled by side touchpad backed with solid diagnostics
MULTI PHASE CAPABLE: Connection ready to single or two-phase power supplies up to 20A
ONE-TOUCH SANITISE CYCLE: Single button 20-minute water sanitisation cycle to immediately engages the ozone/uv, filtration pump & blower to purge plumbing lines and refresh water quality after spa use. Easy to use, with large, backlit display and buttons
COLOURSHADZ LED LIGHTING EFFECTS:Advanced lighting software provides choice of colour mixing mode, effect transition speed and brightness adjustment; This feature is only available when SpaNet lighting is used
100% SEALED CONTROL ENCLOSURE: Sealed to prevent water or insect ingress
DYNAMIC THERMAL TUNING: Adapt and tune itself to spa pool in the environment to reduce demand heat cycling and operating costs
OPTICAL WATER SENSING Provides trouble-free water detection system eliminating pressure and flow switch maintenance problems
AUTOMATIC DAILY PURGE: Daily automatic sanitising cycle set at 10-minute cycle to operate pumps & blower to purge plumbing lines while filtering
COMFORT SET AIR BLOWER CONTROLSpa side touchpad transforms a single-speed blower into a variable speed to manually adjust air massage desired comfort level.
Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone. The SV2 only has one UV/Ozone port.
Power Specifications:
1 phase 230-240v AC
3 phase 400-415v AC
50/60Hz
MAX total current 20amp or 16amp per phase
1 x 230V dedicated mains outlet for accessories
Heater Specification:
Variable spa heater up to 3kW
Blower Specification:
Variable Speed / Ramping Air Blower
Lighting Specification:
Light x 1 (needs to be a Spanet LED light)
Pump Configurations
1 X 1-spd jet pump
1 x 2-spd jet pump
1 x circ pump + 1 x 1-spd jet pump
1 x circ pump + 1 x 2-spd jet pump
SKU | 125372-KIT |
Model # | 125372-KIT |
Brand | SpaNet® |
Shipping Weight | 5.0000kg |
Shipping Width | 0.300m |
Shipping Height | 0.200m |
Shipping Length | 0.400m |
Shipping Cubic | 0.024000000m3 |
This is a great replacement controller for most portable spas.
Do not confuse this control box with the SV3-VH or SV4-VH or the XS series.
TOUCHPAD PROGRAMMABLE FILTRATION:
Smart touchpad menus easy-set time clock filtration cycle hours per day with flexible sleep settings to save you money.
GELL FILLED KEYPAD:
Unlike many keypads on the market, the SV2 spa touchpad
SMART VARIABLE HEATER: Larger heater for fast heat recovery and reduces heat loss while spa pool is in use; automatically alter its output to suit the available power when accessory loads are operating or reduce to lower Kw rating for circuits with minimum power.
HEAT PUMP INTERFACE: Spa heating/cooling control/heat pump functions controlled by side touchpad backed with solid diagnostics
MULTI PHASE CAPABLE: Connection ready to single or two-phase power supplies up to 20A
ONE-TOUCH SANITISE CYCLE: Single button 20-minute water sanitisation cycle to immediately engages the ozone/uv, filtration pump & blower to purge plumbing lines and refresh water quality after spa use. Easy to use, with large, backlit display and buttons
COLOURSHADZ LED LIGHTING EFFECTS:Advanced lighting software provides choice of colour mixing mode, effect transition speed and brightness adjustment; This feature is only available when SpaNet lighting is used
100% SEALED CONTROL ENCLOSURE: Sealed to prevent water or insect ingress
DYNAMIC THERMAL TUNING: Adapt and tune itself to spa pool in the environment to reduce demand heat cycling and operating costs
OPTICAL WATER SENSING Provides trouble-free water detection system eliminating pressure and flow switch maintenance problems
AUTOMATIC DAILY PURGE: Daily automatic sanitising cycle set at 10-minute cycle to operate pumps & blower to purge plumbing lines while filtering
COMFORT SET AIR BLOWER CONTROLSpa side touchpad transforms a single-speed blower into a variable speed to manually adjust air massage desired comfort level.
Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone. The SV2 only has one UV/Ozone port.
Power Specifications:
1 phase 230-240v AC
3 phase 400-415v AC
50/60Hz
MAX total current 20amp or 16amp per phase
1 x 230V dedicated mains outlet for accessories
Heater Specification:
Variable spa heater up to 3kW
Blower Specification:
Variable Speed / Ramping Air Blower
Lighting Specification:
Light x 1 (needs to be a Spanet LED light)
Pump Configurations
1 X 1-spd jet pump
1 x 2-spd jet pump
1 x circ pump + 1 x 1-spd jet pump
1 x circ pump + 1 x 2-spd jet pump
SKU | 125372-KIT |
Model # | 125372-KIT |
Brand | SpaNet® |
Shipping Weight | 5.0000kg |
Shipping Width | 0.300m |
Shipping Height | 0.200m |
Shipping Length | 0.400m |
Shipping Cubic | 0.024000000m3 |
This is a great replacement controller for most portable spas.
Do not confuse this control box with the SV3-VH or SV4-VH or the XS series.
TOUCHPAD PROGRAMMABLE FILTRATION:
Smart touchpad menus easy-set time clock filtration cycle hours per day with flexible sleep settings to save you money.
GELL FILLED KEYPAD:
Unlike many keypads on the market, the SV2 spa touchpad
SMART VARIABLE HEATER: Larger heater for fast heat recovery and reduces heat loss while spa pool is in use; automatically alter its output to suit the available power when accessory loads are operating or reduce to lower Kw rating for circuits with minimum power.
HEAT PUMP INTERFACE: Spa heating/cooling control/heat pump functions controlled by side touchpad backed with solid diagnostics
MULTI PHASE CAPABLE: Connection ready to single or two-phase power supplies up to 20A
ONE-TOUCH SANITISE CYCLE: Single button 20-minute water sanitisation cycle to immediately engages the ozone/uv, filtration pump & blower to purge plumbing lines and refresh water quality after spa use. Easy to use, with large, backlit display and buttons
COLOURSHADZ LED LIGHTING EFFECTS:Advanced lighting software provides choice of colour mixing mode, effect transition speed and brightness adjustment; This feature is only available when SpaNet lighting is used
100% SEALED CONTROL ENCLOSURE: Sealed to prevent water or insect ingress
DYNAMIC THERMAL TUNING: Adapt and tune itself to spa pool in the environment to reduce demand heat cycling and operating costs
OPTICAL WATER SENSING Provides trouble-free water detection system eliminating pressure and flow switch maintenance problems
AUTOMATIC DAILY PURGE: Daily automatic sanitising cycle set at 10-minute cycle to operate pumps & blower to purge plumbing lines while filtering
COMFORT SET AIR BLOWER CONTROLSpa side touchpad transforms a single-speed blower into a variable speed to manually adjust air massage desired comfort level.
Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone. The SV2 only has one UV/Ozone port.
Power Specifications:
1 phase 230-240v AC
3 phase 400-415v AC
50/60Hz
MAX total current 20amp or 16amp per phase
1 x 230V dedicated mains outlet for accessories
Heater Specification:
Variable spa heater up to 3kW
Blower Specification:
Variable Speed / Ramping Air Blower
Lighting Specification:
Light x 1 (needs to be a Spanet LED light)
Pump Configurations
1 X 1-spd jet pump
1 x 2-spd jet pump
1 x circ pump + 1 x 1-spd jet pump
1 x circ pump + 1 x 2-spd jet pump
SKU | 125372-KIT |
Model # | 125372-KIT |
Brand | SpaNet® |
Shipping Weight | 5.0000kg |
Shipping Width | 0.300m |
Shipping Height | 0.200m |
Shipping Length | 0.400m |
Shipping Cubic | 0.024000000m3 |
We are proud that Spa World customers have given us a Five Star Trustpilot rating.
For peace of mind
With a Spa Store Account
on AU orders over $199*
With 7-day online chat support