Spa Store pH Decreaser 500g
- An effective way to reduce the pH level & alkalinity in spa water
- Provides for more effective chlorine performance and superior water comfort
- Prevents cloudy water and scale build-up caused by high pH levels
- Can be used with Chlorine and Hydrogen Peroxide
- May be used with Nature2®
- Safe to store and handle
USAGE INSTRUCTIONS
- This product is used for lowering pH and alkalinity. The ideal pH level is 7.4 - 7.6
- Always test the water using test strips before adding chemicals
- Dissolve the product in a bucket of spa water, and then apply the solution evenly around the edges of the spa with the filter running for 1 hour.
- As a guide, do not add more than 30 grams of this product to 1000L of spa water at any one time and allow 1-2 hours before subsequent dosing.
PRODUCT DETAILS
- Size: 500g
- Model: 5002018B
- Sold Individually
GENERAL INSTRUCTIONS
- We recommended pH testing regularly by use of reliable test strips
- If pH falls outside the required range (7.2-7.6) add pH increaser or pH decreaser as needed.
- Dose spa 8-10 hours before planned use time. (If you plan on using the spa in the evening, dose in the morning).
Read the guide below for more details on maintenance in your spa
DISCLAIMER
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers. We will not accept responsibility for the use of these products.
PRODUCT SELECTION TIPS
- Check your current water treatment type.
- Is your system chlorine-based, non-chlorine?
- Check your water volume.
Still not sure this is the correct chemical? Contact us.