Spa World Pipe Cleaner & Conditioner 500ml

Used to clean the internal plumbing in your spa, reduce biofilm and oils built up in spa plumbing

Product Features

• Fast-acting, works in all water types
• Chlorine Free, Phosphate Free, Sulphate Free
• Suitable for both Spa Pools and Spa Baths
• Can be used in weekly maintenance

Directions for use as a Pipe Conditioner

1. Switch on the filter pump and add Spa Conditioner & Cleaner at a rate of 20mls (2 caps) per 1000 litres of spa water every two weeks. (1 cap = 10mls)
2. Run the filter pump for one hour with blower and air controls open to aerate the spa. The cleaning process will result in the surface foam turning brown in colour. Scoop it out off the water surface to waste. (Use pantyhose over a coat hanger to act as a simple scoop)
3. Once the spa water is clean, wipe the sides of the spa with a damp absorbent cloth.
4. Use every two weeks as directed.

Directions for use as a Pipe Cleaner

1. Pipe degreaser works best when water is still warm, as this helps to loosen substances inside your pipework.
2. Follow the dosing instructions on the label and add the appropriate amount for your spa size
3. Turn on your spa and run for 1 hour so the degreaser has time to work through your pipes
4. You may also wish to change the direction of your jets so they are facing downwards. The cleaning process will result in the surface foam turning brown in colour. Scoop it out off the water surface to waste.
5. Turn blower on and off several times
6. Empty water and clean filters using spa filter cartridge cleaner

Dosage Instructions:

• Frequency: Use every 3-4 months for portable spas and every 12 months for swim spas before draining the spa.
• Amount: Add 50ml of pipe cleaner for every 1,000 litres of spa water.

Directions for Spa Baths

1. Fill spa bath with warm to hot water above jets.
2. Open all the jets and air controls.
3. Pour 50mls (5 caps) of Spa Conditioner & Cleaner into the water and run for 15 minutes. Foaming will occur which will turn brown depending on the amount of contaminants in the pipe work.
4. Switch off the spa pump and drain the spa.
5. Clean the interior of the spa bath using a damp cloth, immediately after draining.
6. Treat the spa bath at least every three to four weeks.

Download Product MSDS

Safety Data Sheet

Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.

Specifications

• Contains: Alkyldimethylethylbenzylammonium Chloride 80g/L
• Size: 500ml
• Model: 5002004SW
• Manufacturer: Spa World

Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only.Spa World and its staff recommend you read the full instructions on all chemical containers. We will not accept responsibility for the use of these products.

Got more questions? 

Talk to us on live chat, or email us your spa questions and we'll be happy to help!

DOWNLOAD INFORMATION